Composite-derived monomers affect cell viability and cytokine expression in human leukocytes stimulated with Porphyromonas gingivalis

Abstract Objectives: Dental composites release unreacted resin monomers into the oral environment, even after polymerization. Periodontal cells are, therefore, exposed to substances that potentially elicit the immune inflammatory response. The underlying molecular mechanisms associated with the interaction between resin monomers and human immune cells found in the gingival crevicular fluid are not fully understood yet. This study investigated the ability of bisphenol A-glycidyl methacrylate (BISGMA), urethane dimethacrylate (UDMA) and triethylene glycol dimethacrylate (TEGDMA) to induce apoptosis and cytokine release by human leukocytes stimulated with a periodontal pathogen. Methodology: Peripheral blood mononuclear cells (PBMC) from 16 healthy individuals were included in this study. To determine the toxicity, the PBMC were incubated for 20 hours, with monomers, for the analysis of cell viability using MTT assay. To evaluate cell death in the populations of monocytes and lymphocytes, they were exposed to sub-lethal doses of each monomer and of heat-inactivated Porphyromonas gingivalis (P. gingivalis) for 5 hours. Secretions of IL-1β, IL-6, IL-10 and TNF-α were determined by ELISA after 20 hours. Results: UDMA and TEGDMA induced apoptosis after a short-time exposure. Bacterial challenge induced significant production of IL-1β and TNF-α (p<0.05). TEGDMA reduced the bacterial-induced release of IL-1β and TNF-α, whereas UDMA reduced IL-1β release (p<0.05). These monomers did not affect IL-10 and IL-6 secretion. BISGMA did not significantly interfere in cytokine release. Conclusions: These results show that resin monomers are toxic to PBMC in a dose-dependent manner, and may influence the local immune inflammatory response and tissue damage mechanisms via regulation of bacterial-induced IL-1β and TNF-α secretion by PBMC.

Effect of iodonium salt and chitosan on the physical and antibacterial properties of experimental infiltrants

Abstract Resinous infiltrants are indicated in the treatment of incipient carious lesions, and further development of these materials may contribute to greater control of these lesions. The aim of this study was to analyze the physical and antibacterial properties of experimental infiltrants containing iodonium salt and chitosan. Nine experimental infiltrants were formulated by varying the concentration of the diphenyliodonium salt (DPI) at 0, 0.5 and 1 mol%; and chitosan at 0, 0.12 and 0.25 g%. The infiltrants contained the monomeric base of triethylene glycol dimethacrylate and bisphenol-A dimethacrylate ethoxylate in a 75 and 25% proportion by weight, respectively; 0.5 mol% camphorquinone and 1 mol% ethyl 4-dimethylaminobenzoate. The degree of conversion was evaluated using Fourier transformer infrared spectroscopy, and the flexural strength and elastic modulus using the three-point bending test. Sorption and solubility in water, and antibacterial analysis (minimum inhibitory concentration and minimum bactericidal concentration) were also analyzed. Data was analyzed statistically by two-way ANOVA and Tukey's test (p<0.05), with the exception of the antibacterial test, which was evaluated by visual inspection. In general, the infiltrant group containing 0.5% DPI and 0.12% chitosan showed high values of degree of conversion, higher values of elastic modulus and flexural strength, and lower sorption values in relation to the other groups. Antibacterial activity was observed in all the groups with DPI, regardless of the concentration of chitosan. The addition of DPI and chitosan to experimental infiltrants represents a valid option for producing infiltrants with desirable physical and antibacterial characteristics.

Evaluation of physical-mechanical properties, antibacterial effect, and cytotoxicity of temporary restorative materials

Abstract The objective of this study was to compare selective physical-mechanical properties, antibacterial effects and cytotoxicity of seven temporary restorative materials (TRM): five resin-based materials [Bioplic (B), Fill Magic Tempo (FM), Fermit inlay (F), Luxatemp LC (L) and Revotek LC (R)], and zinc oxide-eugenol cement (IRM) and glass ionomer cement (GIC) as the controls. Material and methods The physical-mechanical properties were evaluated by determining microleakage (ML), ultimate tensile strength (UTS) and Shore D hardness (SDH). In addition, the polymerization rate (Pr-1), depth of cure (DC), water sorption and solubility (WS/SL) were evaluated. The antimicrobial effects of the materials were assessed by biofilm accumulation of Streptococcus mutans (BT) and the direct contact test (DCT) by exposure to Enterococcus faecalis for 1 and 24 h, and cytotoxicity by MTT assay. The data were analyzed by ANOVA or Kruskall-Wallis tests, and a complementary post-hoc method (p<0.05). Results Group B, followed by FM and GIC had significantly lower percentages of microleakage in comparison with the other groups; Groups FM and L showed the highest WS, while Groups R and FM showed the significantly lowest SL values (p<0.05). Group R showed the statistically highest UTS mean and the lowest DC mean among all groups. Group F showed the lowest S. mutans biofilm accumulation (p=0.023). Only the Group L showed continued effect against E. faecalis after 1 h and 24 h in DCT. The L showed statistically lower viability cell when compared to the other groups. Conclusions These findings suggest the antibacterial effect of the temporary materials Fill Magic and Bioplic against S. mutans, while Luxatemp showed in vitro inhibition of S. mutans biofilm accumulation and E. faecalis growth. Regarding the cell viability test, Luxatemp was the most cytotoxic and Fill Magic was shown to be the least cytotoxic.

Model resin composites incorporating ZnO-NP: activity against S. mutans and physicochemical properties characterization

Abstract Although resin composites are widely used in the clinical practice, the development of recurrent caries at composite-tooth interface still remains as one of the principal shortcomings to be overcome in this field. Objectives To evaluate the activity against S. mutans biofilm of model resin composites incorporating different concentrations of ZnO-nanoparticles (ZnO-NP) and characterize their physicochemical properties. Materials and Methods Different concentrations of ZnO-NP (wt.%): E1=0, E2=0.5, E3=1, E4=2, E5=5 and E6=10 were incorporated into a model resin composite consisting of Bis-GMA-TEGDMA and barium borosilicate particles. The activity against S. mutans biofilm was evaluated by metabolic activity and lactic acid production. The following physicochemical properties were characterized: degree of conversion (DC%), flexural strength (FS), elastic modulus (EM), hardness (KHN), water sorption (Wsp), water solubility (Wsl) and translucency (TP). Results E3, E4, E5 and E6 decreased the biofilm metabolic activity and E5 and E6 decreased the lactic acid production (p<0.05). E6 presented the lowest DC% (p<0.05). No significant difference in FS and EM was found for all resin composites (p>0.05). E5 and E6 presented the lowest values of KHN (p<0.05). E6 presented a higher Wsp than E1 (p<0.05) and the highest Wsl (p<0.05). The translucency significantly decreased as the ZnO- NP concentration increased (p<0.05). Conclusions The incorporation of 2 - 5 wt.% of ZnO-NP could endow antibacterial activity to resin composites, without jeopardizing their physicochemical properties.

Effects of triethylene glycol dimethacrylate (TEGDMA) on the odontoclastic differentiation ability of human dental pulp cells

Abstract Objectives: The primary purpose of this study was to examine the effects of triethylene glycol dimethacrylate (TEGDMA) on odontoclastic differentiation in the dental pulp tissue. Material and Methods: The effects of different TEGDMA dosages on the odontoclastic differentiation capability of dental pulp cells were analyzed in vitro using the following methodologies: i) flow cytometry and tartrate-resistant acid phosphatase (TRAP) staining; ii) apoptotic effects using Annexin V staining; iii) mRNA expression of osteoprotegerin (OPG) and receptor activator of nuclear factor (NF)-kB ligand (RANKL) genes by quantitative Real-time PCR (qRT-PCR); and iv) OPG and RANKL protein expression by enzyme-linked immunosorbent assay (ELISA). Results: TEGDMA caused relatively less odontoclastic differentiation in comparison with the control group; however, odontoclastic differentiation augmented with increasing doses of TEGDMA (p<0.05). The mRNA and protein expression of OPG was lower in TEGDMA treated pulp cells than in the control group (p<0.05). While the mRNA expression of RANKL remained unchanged compared to the control group (p>0.05), its protein expression was higher than the control group (p<0.05). In addition, TEGDMA increased the apoptosis of dental pulp cells dose dependently. Conclusions: TEGDMA reduced the odontoclastic differentiation ability of human dental pulp cells. However, odontoclastic differentiation ratios increased proportionally with the increasing dose of TEGDMA.

Influence of addition of [2-(methacryloyloxy)ethyl]trimethylammonium chloride to an experimental adhesive

Abstract The aim of this study was to develop an experimental adhesive with addition of [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC) and to evaluate its mechanical and biological properties and its in vitro antibacterial activity. An experimental adhesive resin was formulated with Bis-GMA, TEGDMA, and HEMA. The antibacterial monomer was added at concentrations of 1%, 2.5%, and 5% (METAC groups). A group without METAC addition was used as control. The experimental adhesives were evaluated as to their antibacterial potential against Streptococcus mutans, degree of conversion, and softening in ethanol for 2 hours. The data were analyzed by one-way ANOVA, Tukey’s post-hoc test, and the paired Student’s t-test (significance level of 0.05). METAC showed antibacterial activity against S. mutans at all concentrations (p < 0.05). There was no statistical difference across METAC groups (p > 0.05). The 1%, 2.5%, and 5% groups yielded the highest mean values for degree of conversion (p < 0.05). The 1% group did not differ from the control group (p > 0.05). There was no statistical difference in baseline microhardness values (p > 0.05) and microhardness values after immersion in ethanol were lower than at baseline for all groups (p < 0.05). There was no statistical difference in the reduction of Knoop hardness number (KHN) after immersion in ethanol for any of the groups (p > 0.05). The results of the present study indicate that METAC is a promising antibacterial agent when added to an adhesive system.

Efeito da incorporação de agentes antifúngicos na resistência à tração e porosidade de materiais resilientes temporários para base de próteses / Effect of incorporation of antifungal agents on the ultimate tensile strength and porosity of temporary soft denture liners

Este estudo investigou a resistência à tração (ou limite de resistência à tração- LRT) e a porosidade de reembasadores resilientes temporários modificados por concentrações inibitórias mínimas (CIMs) de agentes antifúngicos para o biofilme Candida albicans (SC5314). Para os testes de LRT, corpos de prova em forma de halteres (n=7) com uma área transversal de 33 mm x 6 mm x 3 mm foram produzidos para os materiais resilientes (Trusoft e Softone) sem (controle) ou com incorporação de cinco fármacos em suas CIMs: nistatina- 0,032 g; diacetato de clorexidina- 0,064; cetoconazol- 0,128 g; miconazol- 0,256 g; itraconazol-0,256 g (grama de fármaco por grama de pó de material resiliente). Após a plastificação, as amostras foram imersas em água destilada a 37°C durante 24 h, 7 e 14 dias e, então, testadas em tensão em uma máquina universal de ensaios (EMIC DL-500 MF) a 40 mm/min. A porosidade foi mensurada por absorção de água, com base na exclusão do efeito plastificante. Inicialmente, determinou-se por isotermas de sorção, que a solução de armazenagem adequada para os corpos de prova (65 mm x 10 mm x 3,3 mm) de ambos os materiais foi o cloreto de cálcio anidro a 50% (S50). Assim, o fator de porosidade (FP) foi calculado para os grupos de estudo (n=10) formados por espécimes sem (controle) ou com incorporação de fármaco em suas CIMs (nistatina, clorexidina ou cetoconazol) após a armazenagem em água destilada ou S50 por 24 h, 7 e 14 dias. Os dados de resistência à tração (MPa) e percentagem de alongamento (%) foram submetidos à ANOVA de 3 fatores seguida pelo teste de Tukey (=0,05). Os dados de porosidade foram analisados estatisticamente por ANOVA de medidas repetidas para 4 fatores e teste de Tukey (=0,05). Ao final de 14 dias, a resistência à tração para ambos os materiais foi significativamente menor nos grupos modificados pelo miconazol e itraconazol em relação aos outros grupos (P<0,0001), que não mostraram diferenças significativas entre si (P>0,05). Após 7 e 14 dias em água, o miconazol e itraconazol adicionados a ambos os materiais resultaram em percentagens significativamente menores de alongamento em comparação com os outros fármacos e ao controle (P<0,0001), que foram semelhantes entre si (P>0,05). O cetoconazol não resultou em alterações significativas no FP para ambos os materiais resilientes em água ao longo de 14 dias (P>0,05). Em comparação aos controles, houve aumento dos FPs do Softone e Trusoft aos 14 dias de imersão em água somente após a adição de nistatina e clorexidina e de clorexidina, respectivamente (P<0,05). Ambos os materiais não apresentaram alterações significativas no FP em até 14 dias de imersão na S50, em comparação aos controles (P>0,05). Em todas as condições experimentais, os FPs do Softone e Trusoft foram significativamente menores quando imersos em S50 em comparação com a água destilada (P<0,05). Concluiu-se que a adição de nistatina, clorexidina e cetoconazol nas CIMs para o biofilme de C. albicans não resultou em efeitos deletérios na resistência à tração e na percentagem de alongamento dos materiais resilientes temporários para base de prótese até o período de 14 dias. A adição de antifúngicos nas CIMs não resultou em efeitos adversos à porosidade de ambos os materiais resilientes temporários em diferentes períodos de imersão em água, com exceção da clorexidina e nistatina no Softone e clorexidina no Trusoft aos 14 dias. Não foram observados efeitos deletérios para a porosidade de ambos os materiais resilientes modificados com as CIMs dos fármacos durante os 14 dias de imersão na S50.(AU)

This study investigated the tensile strength (ultimate tensile strength- UTS) and porosity of temporary soft denture liners modified by minimum inhibitory concentrations (MICs) of antifungal agents for Candida albicans biofilm (SC5314). For UTS tests, dumbbell-shaped specimens (n=7) with a central cross-sectional area of 33 mm x 6 mm x 3 mm were produced by resilient materials (Trusoft and Softone) without (control) or with incorporation of five drugs at MICs: nystatin- 0.032 g; chlorhexidine diacetate-0.064 g; ketoconazole- 0.128 g; miconazole- 0.256 g; itraconazole- 0.256 g (each per gram of soft liner powder). After plasticization, specimens were immersed in distilled water at 37°C for 24 h, 7 and 14 days, and then tested in tension in a universal testing machine (EMIC DL-500 MF) at 40 mm/min. The porosity was measured by water absorption, based on exclusion of the plasticizer effect. Initially, it was determined by sorption isotherms that the adequate storage solution for specimens (65 mm x 10 mm x 3.3 mm) of both materials was 50% anhydrous calcium chloride (S50). Then, the porosity factor (PF) was calculated for the study groups (n=10) formed by specimens without (control) or with drug incorporation at MICs (nystatin, chlorhexidine or ketoconazole) after storage in distilled water or S50 for 24 h, 7 and 14 days. Data of tensile strength (MPa) and elongation percentage (%) were submitted to 3-way ANOVA followed by Tukey's test (=0.05). Data of porosity were statistically analyzed by 4-way repeated measures ANOVA and Tukeys test (=0.05). At the end of 14 days, the tensile strength for both materials was significantly lower in the groups modified by miconazole and itraconazole compared to the other groups (P<0.0001), which showed no significant difference between them (P>0.05). After 7 and 14 days in water, miconazole and itraconazole added into both materials result in significant lower elongation percentages compared to the other drugs and control (P<.0001), which were similar to each other (P>0.05). Ketoconazole resulted in no significant changes in PF for both liners in water over 14 days (P>0.05). Compared to the controls, Softone and Trusoft PFs were increased at 14-day water immersion only after addition of nystatin and chlorhexidine, and chlorhexidine, respectively (P<0.05). Both materials showed no significant changes in PF in up to 14 days of S50 immersion, compared to the controls (P>0.05). In all experimental conditions, Softone and Trusoft PFs were significantly lower when immersed in S50 compared to distilled water (P<0.05). It was concluded that the addition of the nystatin, chlorhexidine and ketoconazole at MICs for C. albicans biofilm resulted in no harmful effects on the ultimate tensile strength and elongation percentage of the temporary soft denture liners up to 14-day period. The addition of antifungals at MICs resulted in no detrimental effects for the porosity of both temporary soft liners in different periods of water immersion, except for chlorhexidine and nystatin in Softone and chlorhexidine in Trusoft at 14 days. No deleterious effect was observed for the porosity of both soft liners modified by the drugs at MICs over 14 days of S50 immersion.(AU)

Development of mesalazine pellets coated with methacrylic-derived polymer / Desenvolvimento de pelotas mesalazina revestidos com metacrílico derivado de polímero

Mesalazine (5-ASA) is the standard drug for the treatment of inflammatory bowel disease (IBD) due to its local effect on intestinal and colonic mucosa. The effective and safe treatment of this disease requires more efficient delivery of the active substance to its site of action. The focus of this study was the use of multiparticulate systems, a modified release form in which the drug is divided into several functional subunits of release in the form of granules or pellets. When these forms are administered, they are rapidly disintegrated, distributing their content throughout the gastrointestinal tract. The aim of this study was to develop and evaluate a multiparticulate system consisting of pellets coated with polymer for pH-dependent release, derived from methacrylic acid and incorporated into the tablet dosage form of mesalazine as a model drug. The extrusion-spheronisation technique was used, resulting in smooth and spherical pellets with uniform size distribution, which were coated in fluidized bed using Opadry® Enteric 94K28327 containing Eudragit® S100 as the agent regulating drug release. The dissolution profile of coated pellets showed good control of drug release from the polymer at the two levels of coating evaluated (8 percent and 10 percent), but only the 10 percent coated pellets were statistically similar to Asalit® 400 mg.

A mesalazina (5-ASA) tem se apresentado como fármaco padrão para o tratamento da doença inflamatória intestinal (DII) devido ao seu efeito local na mucosa intestinal e colônica. A terapia efetiva e segura desta doença requer a chegada da substância ativa ao seu local de ação com maior eficiência. Nessa busca, tem se destacado o uso de Sistemas Multiparticulados, forma farmacêutica de liberação modificada, em que o fármaco está dividido em várias subunidades funcionais de liberação, sob a forma de grânulos ou péletes, que quando administrados, são rapidamente desintegrados distribuindo seu conteúdo por todo trato gastrintestinal. Este trabalho teve como objetivo desenvolver e avaliar péletes revestidos com polímero de liberação pH-dependente, derivado do ácido metacrílico, tendo como fármaco modelo a mesalazina. A técnica de extrusão-esferonização foi utilizada obtendo-se péletes lisos e esféricos com distribuição granulométrica uniforme, que foram revestidos em leito fluidizado utilizando Opadry® Enteric 94K28327 contendo Eudragit® S100 como agente regulador da liberação do fármaco. O perfil de dissolução dos péletes revestidos demonstrou bom controle na liberação do fármaco por parte do polímero nos dois níveis de revestimento avaliados (8 e 10 por cento), porém, apenas os péletes revestidos a 10 por cento demonstraram semelhança estatística com o medicamento de referência Asalit® 400 mg.